Description
Power Pack LiFePO₄ 1S 3V 6000mAh 1S1P 3C with BMS LFP Battery Pack
The Power Pack LiFePO₄ 1S 6000mAh 3C Battery Pack with BMS is a compact, rechargeable lithium iron phosphate (LFP) battery designed for low-voltage electronic devices and specialized power applications.
This battery pack has a capacity of 6000mAh (6Ah) and uses a single-cell configuration (1S1P). LiFePO₄ chemistry offers stable operation and good cycle-life potential when used within the cell manufacturer’s specified limits.
The specified 3C discharge rate corresponds to a theoretical discharge current of 18A. Actual current capability depends on the cell, BMS, wiring, and connector ratings.
Important: A single LiFePO₄ cell has a nominal voltage of approximately 3.2V, rather than exactly 3.0V. Its maximum charging voltage is typically 3.6V, subject to the cell manufacturer’s specifications.
Key Features
- Battery Chemistry: Lithium Iron Phosphate (LiFePO₄ / LFP)
- Nominal Voltage: 3.2V
- Capacity: 6000mAh / 6Ah
- Configuration: 1S1P
- Energy Capacity: Approximately 19.2Wh
- Specified Discharge Rate: 3C
- Theoretical 3C Discharge Current: 18A
- BMS: Included, as specified in the product title
- Rechargeable: Yes
- Cell Configuration: Single-cell pack
- Applications: Compatible low-voltage electronics and specialized equipment
Battery Configuration
| Parameter | Details |
|---|---|
| Series Configuration | 1S |
| Parallel Configuration | 1P |
| Total Cell Count | 1 |
| Cell Capacity | 6000mAh |
| Pack Capacity | 6000mAh / 6Ah |
| Nominal Cell Voltage | 3.2V |
| Nominal Pack Voltage | 3.2V |
| Maximum Charging Voltage | Typically 3.6V |
| Total Energy | 3.2V × 6Ah = 19.2Wh |
3C Discharge Configuration
| Specification | Details |
|---|---|
| Battery Capacity | 6Ah |
| Discharge Rate | 3C |
| Theoretical Discharge Current | 6Ah × 3 = 18A |
| Approximate Power at Nominal Voltage | 57.6W at 18A |
| Continuous Discharge Capability | Depends on cell, BMS, wiring, and connector ratings |
Note: The theoretical 18A calculation does not guarantee continuous operation at 18A. Verify the cell’s discharge rating and the BMS current limit before connecting a load.
BMS Protection
The battery pack includes a BMS. Depending on the selected model, its protection functions may include:
- Overcharge protection
- Over-discharge protection
- Overcurrent protection
- Short-circuit protection
- Voltage monitoring
For a single-cell battery, confirm that the BMS is specifically designed for 1S LiFePO₄ chemistry and supports the intended charge and discharge currents.
Connector & Charging Requirements
- Use a charger specifically designed for a single-cell LiFePO₄ battery.
- Typical maximum charging voltage: 3.6V, subject to the cell manufacturer’s specification.
- Do not use a 4.2V charger intended for a single-cell NMC lithium-ion battery.
- Select the connector and wire gauge according to the required current.
- Confirm polarity before connecting the charger or equipment.
Applications
- Low-voltage electronic equipment
- Portable and specialized power devices
- Embedded electronics and instrumentation
- Custom battery-powered projects
- Compatible low-voltage backup systems
Confirm that the connected device supports the battery’s operating voltage and current range.
Advantages
- Compact single-cell configuration
- Rechargeable LiFePO₄ chemistry
- 6Ah capacity
- Approximately 19.2Wh nominal energy
- BMS included for battery management
- Suitable for compatible low-voltage applications
Package Includes
- 1 × Power Pack LiFePO₄ 1S 6000mAh battery pack
- 1 × BMS, as specified in the product configuration
