Description
Power Pack LiFePO₄ 23S 72V 48Ah 23S8P 3C With BMS LFP Battery Pack
The Power Pack LiFePO₄ 23S 72V 48Ah 3C Battery Pack with BMS is a high-capacity rechargeable lithium iron phosphate (LFP) battery designed for compatible electric vehicles, industrial equipment, robotics, and custom battery-powered applications.
Built with a 23S8P configuration, this battery pack contains 184 cells, assuming 6Ah cells. It delivers a nominal voltage of 73.6V, a capacity of 48Ah, and approximately 3,532.8Wh of energy. The integrated Battery Management System (BMS) helps monitor and protect the battery, depending on the selected BMS model and its specifications.
The specified 3C discharge rate corresponds to a theoretical current of 144A. Actual continuous discharge capability depends on the cell ratings, BMS, wiring, connectors, and thermal management.
Key Features
Battery Chemistry: LiFePO₄ (Lithium Iron Phosphate)
Voltage Class: 72V-class battery pack
Nominal Voltage: 73.6V
Capacity: 48Ah / 48,000mAh
Configuration: 23S8P
Total Cell Count: 184 cells, assuming 6Ah cells
Energy Capacity: 3,532.8Wh
Specified Discharge Rate: 3C
Theoretical 3C Discharge Current: 144A
BMS: Included
Rechargeable: Yes
Customization: Connector, cable, enclosure, and BMS rating can be confirmed according to application requirements.
Battery Configuration
Parameter Details Series Configuration 23S Parallel Configuration 8P Total Cell Count 23 × 8 = 184 cells Assumed Cell Capacity 6Ah Pack Capacity 8 × 6Ah = 48Ah Nominal Cell Voltage 3.2V Nominal Pack Voltage 23 × 3.2V = 73.6V Maximum Cell Voltage 3.6V, subject to cell specifications Maximum Pack Voltage 23 × 3.6V = 82.8V Total Energy 73.6V × 48Ah = 3,532.8Wh 3C Discharge Configuration
Specification Details Battery Capacity 48Ah Discharge Rate 3C Theoretical Discharge Current 48Ah × 3 = 144A Approximate Power at Nominal Voltage 10,598.4W at 144A Continuous Discharge Capability Must be verified against cell, BMS, wiring, connector, and cooling ratings Important: The calculated 144A is the theoretical current at 3C, not a guaranteed continuous output rating. Confirm that all battery components can safely support the required current.
BMS Protection
The battery pack includes a Battery Management System (BMS). Depending on the selected model, its features may include:
Overcharge protection
Over-discharge protection
Overcurrent protection
Short-circuit protection
Cell voltage monitoring and balancing
Temperature monitoring, if supported
The BMS current rating and protection features should be confirmed before connecting high-current equipment.
Connector & Charging Requirements
Charger type: 23S LiFePO₄-compatible CC/CV charger.
Maximum charging voltage: 82.8V, provided the selected cells are rated for 3.6V per cell.
Do not use an 84V charger intended for a 20S NMC lithium-ion battery.
Select wire gauge and connectors according to the expected operating current.
Verify connector polarity and compatibility before use.
Applications
Compatible electric vehicles and custom EV projects
Industrial and mobile equipment
Robotics and automation systems
High-voltage battery-powered machinery
Special-purpose battery applications
Compatible energy storage systems
Check the equipment’s operating voltage range and current requirements before installation.
Advantages
High-capacity 48Ah battery pack
LiFePO₄ chemistry for stable battery operation
Integrated BMS for battery monitoring and protection
Approximately 3.53kWh nominal energy capacity
23S8P configuration for compatible 72V-class applications
Custom connector, wiring, and enclosure options available upon confirmation
Package Includes
1 × Power Pack LiFePO₄ 23S 72V 48Ah battery pack
1 × BMS installed in the battery pack
