Description
Power Pack LiFePO₄ 3S 9.6V 30000mAh 3S2P 3C With BMS LFP Battery Pack
The Power Pack LiFePO₄ 3S 9.6V 30000mAh 3S2P 3C With BMS is a rechargeable Lithium Iron Phosphate (LiFePO₄/LFP) battery pack designed for applications requiring high capacity, stable voltage, reliable performance, and long service life.
This battery pack uses 6 LiFePO₄ cells arranged in a 3S2P configuration. To achieve the specified 30Ah capacity, the pack uses approximately 15Ah cells. It provides a 9.6V nominal voltage, 30Ah (30,000mAh) capacity, and 288Wh nominal energy.
The pack is equipped with a 3S LiFePO₄ BMS for battery protection and management. With a 3C cell rating, the theoretical discharge capability is approximately 90A, while the actual usable continuous current depends on the cells, BMS, wiring, connectors, and thermal conditions.
Key Features
- Battery Chemistry: LiFePO₄ / LFP
- Nominal Voltage: 9.6V
- Capacity: 30Ah / 30,000mAh
- Configuration: 3S2P
- Cell Capacity: Approximately 15Ah
- Total Cells: 6
- Theoretical 3C Current: 90A
- Maximum Charge Voltage: 10.8V
- Built-in 3S LiFePO₄ BMS
- Rechargeable battery pack
- High energy capacity
- Suitable for custom and industrial applications
3S2P Battery Configuration
The battery pack contains 6 LiFePO₄ cells connected as 3S2P:
- 3 cells in series (3S) → 9.6V nominal
- 2 cells in parallel (2P) → 30Ah capacity
- Total cells: 3 × 2 = 6 cells
- Cell capacity: Approximately 15Ah
- Nominal energy: 9.6V × 30Ah = 288Wh
3C LiFePO₄ Configuration
For a 30Ah battery:
1C = 30A
3C = 30Ah × 3 = 90A theoretical
The 90A figure is a theoretical cell-based calculation. Actual continuous discharge capability depends on the selected cells, BMS rating, wiring, connectors, and thermal management.
BMS Protection
The integrated 3S LiFePO₄ BMS helps provide protection against:
- Overcharge
- Over-discharge
- Over-current
- Short circuit
- Cell voltage imbalance
- Abnormal battery operating conditions
The BMS current rating should be selected according to the actual application and load.
Connector & Wire
- Connector: 5mm DC Jack / 2-Pin JST 54mm
- Standard Wire Length: 5cm
- Custom Wire Length: Available
- Custom connector and cable configurations are available for OEM requirements.
Applications
This 9.6V 30Ah LiFePO₄ battery pack can be used for:
- Portable power equipment
- Robotics and automation
- CCTV and security systems
- LED lighting
- IoT equipment
- GPS and tracking devices
- Communication equipment
- Industrial electronics
- Backup power systems
- Custom electronic projects
- OEM battery applications
Advantages
- 30Ah high-capacity LFP battery
- 288Wh nominal energy
- Stable LiFePO₄ chemistry
- Built-in BMS protection
- 3C theoretical discharge capability
- Rechargeable design
- Long service-life potential
- Custom connector and wire options
- Suitable for industrial and OEM applications
Package Includes
- 1 × 3S 9.6V 30Ah LiFePO₄ Battery Pack
- 1 × 3S LiFePO₄ BMS
- Connector and wires as configured
