Description
Power Pack LiFePO₄ 3S 9.6V 30000mAh 3S5P 3C With BMS LFP Battery Pack
The Power Pack LiFePO₄ 3S 9.6V 30000mAh 3S5P 3C With BMS is a rechargeable lithium iron phosphate (LiFePO₄/LFP) battery pack designed for applications requiring reliable energy storage, high discharge capability, and long cycle life.
This pack uses 15 × 6000mAh LiFePO₄ cells arranged in a 3S5P configuration, providing a nominal voltage of 9.6V and a capacity of 30Ah (30,000mAh). With a 3C theoretical discharge capability, the pack can support up to approximately 90A based on the cell capacity, subject to the actual cell, BMS, wiring, connector, and thermal specifications.
An integrated 3S LiFePO₄ BMS provides protection against overcharge, over-discharge, over-current, short circuit, and other battery protection conditions.
Key Features
- Battery Chemistry: LiFePO₄ / LFP
- Nominal Voltage: 9.6V
- Capacity: 30Ah / 30,000mAh
- Configuration: 3S5P
- Cell Capacity: 6000mAh per cell
- Total Cells: 15
- Theoretical Discharge: 3C / approximately 90A
- Maximum Charge Voltage: 10.8V
- Built-in 3S LiFePO₄ BMS
- Rechargeable and designed for long service life
- Suitable for custom electronics, portable power and industrial applications
3S5P Battery Configuration
The pack contains 15 LiFePO₄ cells connected as:
- 3 cells in series (3S) → 9.6V nominal
- 5 cells in parallel (5P) → 30Ah capacity
- 15 cells total
- Cell capacity: 6000mAh
- Nominal energy: 9.6V × 30Ah = 288Wh
3C LiFePO₄ Configuration
For a 30Ah battery:
1C = 30A
3C = 30Ah × 3 = 90A theoretical
The actual continuous discharge current depends on the selected cells, BMS current rating, wiring, connectors, and thermal management. The 3C figure should therefore be treated as the theoretical cell-based rating, not a guaranteed continuous pack output.
BMS Protection
The integrated 3S LiFePO₄ BMS is designed to provide protection against:
- Overcharge
- Over-discharge
- Over-current
- Short circuit
- Cell voltage imbalance
- Battery operating faults
The exact BMS current rating and balancing specification should be matched to the intended application.
Connector & Wire
- Connector: 5mm DC Jack / 2-Pin JST 54mm
- Standard Wire Length: 5cm
- Custom Wire Length: Available
- Connector and cable configuration can be customized according to application requirements.
Applications
This 9.6V 30Ah LiFePO₄ battery pack can be used for:
- Portable power equipment
- Robotics and automation
- IoT and electronic equipment
- CCTV and security systems
- LED lighting systems
- Backup power systems
- Industrial electronics
- GPS and tracking equipment
- Communication equipment
- Custom electronic projects
- OEM and custom battery applications
Advantages
- High energy density for its size
- Stable LiFePO₄ chemistry
- Long cycle-life potential
- Rechargeable design
- Integrated battery protection
- 30Ah capacity
- 3C theoretical discharge capability
- Suitable for customized applications
- Available with customized connector and wire length
Package Includes
- 1 × 3S 9.6V 30Ah LiFePO₄ Battery Pack
- 1 × 3S LiFePO₄ BMS
- Connector and wires as configured
