Description
Power Pack LiFePO₄ 23S 72V 30Ah 23S5P 3C With BMS LFP Battery Pack
The Power Pack LiFePO₄ 23S 72V 30Ah 3C Battery Pack with BMS is a rechargeable lithium iron phosphate battery designed for high-capacity, high-voltage battery applications. Its 23S5P configuration provides a 30Ah capacity, assuming 6Ah cells, with a total of 115 cells.
With a nominal voltage of 73.6V and energy capacity of 2,208Wh, this LFP battery pack is suitable for compatible electric vehicles, industrial equipment, robotics, and custom battery-powered systems.
The integrated Battery Management System (BMS) helps monitor and protect the battery, with specific protection functions depending on the selected BMS model. The specified 3C discharge rate corresponds to a theoretical current of 90A; actual continuous output depends on the cells, BMS, wiring, connectors, and thermal conditions.
Key Features
Battery Chemistry: LiFePO₄ (Lithium Iron Phosphate)
Voltage Class: 72V-class battery pack
Nominal Voltage: 73.6V
Capacity: 30Ah / 30,000mAh
Configuration: 23S5P
Total Cells: 115, assuming 6Ah cells
Energy Capacity: 2,208Wh
Specified Discharge Rate: 3C
Theoretical 3C Discharge Current: 90A
BMS: Included
Rechargeable: Yes
Custom Options: Connector, wiring, enclosure, and BMS rating subject to confirmation
Battery Configuration
Parameter
Details
Series Configuration 23S Parallel Configuration 5P Total Cell Count 23 × 5 = 115 cells Assumed Cell Capacity 6Ah Pack Capacity 5 × 6Ah = 30Ah Nominal Cell Voltage 3.2V Nominal Pack Voltage 23 × 3.2V = 73.6V Maximum Cell Voltage 3.6V, subject to cell specifications Maximum Pack Voltage 23 × 3.6V = 82.8V Total Energy 73.6V × 30Ah = 2,208Wh 3C Discharge Configuration
Specification
Details
Battery Capacity 30Ah Discharge Rate 3C Theoretical Discharge Current 30Ah × 3 = 90A Approximate Power at Nominal Voltage 6,624W at 90A Continuous Discharge Capability Must be confirmed against cell, BMS, wiring, and connector ratings Note: The calculated 90A is the theoretical current at 3C, not a guaranteed continuous discharge rating. Verify the selected cells and BMS can safely support the intended load.
BMS Protection
The battery pack includes a Battery Management System (BMS). Depending on the selected model, protection and monitoring functions may include:
Overcharge protection
Over-discharge protection
Overcurrent protection
Short-circuit protection
Cell voltage monitoring and balancing
Temperature monitoring, if supported
Confirm the BMS current rating and features before connecting high-current loads.
Connector & Charging Requirements
Required charger: 23S LiFePO₄-compatible charger.
Maximum charging voltage: 82.8V, provided the selected cells are rated for 3.6V per cell.
Do not use an 84V charger intended for a 20S NMC lithium-ion pack.
Connector and wire gauge must be selected according to the operating current.
Check polarity and connector compatibility before use.
Applications
Compatible electric vehicles and custom EV projects
Industrial and mobile equipment
Robotics and automation systems
Custom high-voltage battery-powered equipment
Special-purpose battery systems
Compatible energy storage applications
Always verify the equipment’s input-voltage range and current requirements before installation.
Advantages
High-capacity 30Ah battery configuration
LiFePO₄ chemistry for stable battery operation
Integrated BMS for monitoring and protection
2.208kWh nominal energy capacity
23S5P configuration for applications requiring a 72V-class LFP pack
Custom connector, cable, and enclosure options can be discussed
Package Includes
1 × Power Pack LiFePO₄ 23S 72V 30Ah battery pack
1 × BMS installed in the battery pack
