Description
Power Pack LiFePO₄ 23S 72V 315Ah 1C With BMS Prismatic LFP Battery Pack
The Power Pack LiFePO₄ 23S 72V 315Ah 1C With BMS is a high-capacity lithium iron phosphate (LFP) battery pack designed for large-scale energy storage, industrial equipment, electric mobility, and backup power applications. Built using prismatic LFP cells, it offers high energy capacity, stable performance, and long service life when operated within the manufacturer’s specifications.
With a nominal voltage of 73.6V, a capacity of 315Ah, and approximately 23.18kWh of stored energy, this battery pack is suitable for systems requiring substantial energy storage. The integrated Battery Management System (BMS) helps monitor and protect the battery according to the selected BMS model and configuration.
Key Features
Battery Chemistry: Lithium Iron Phosphate (LiFePO₄ / LFP)
Configuration: 23S prismatic cell arrangement
Nominal Voltage: 73.6V (72V-class system)
Capacity: 315Ah
Energy Storage: Approximately 23.18kWh
Discharge Rating: 1C, subject to cell and system ratings
Integrated BMS: Included; current rating to be confirmed
Cell Format: Prismatic LFP cells
Applications: Industrial power, energy storage, and compatible electric vehicles
Battery Configuration
Series Configuration: 23S
Parallel Configuration: 1P, assuming each cell is rated at 315Ah
Total Cell Count: 23 cells under this configuration
Nominal Pack Voltage: 73.6V
Maximum Charging Voltage: 82.8V using a 3.6V-per-cell charge limit
Total Energy: 73.6V × 315Ah = approximately 23.18kWh
1C Discharge Configuration
At a 1C discharge rate, a 315Ah battery has a theoretical discharge current of 315A.
The actual continuous discharge current must be supported by the prismatic cells, BMS, busbars, cables, connectors, and thermal design. Confirm the BMS rating and cell manufacturer’s specifications before operating at this current.
BMS Protection
The integrated BMS is intended to help protect the battery during operation. Depending on the selected model, available protections may include:
Overcharge protection
Over-discharge protection
Overcurrent and short-circuit protection
Cell-voltage monitoring
Temperature monitoring
Cell balancing
Note: Exact protection functions, communication features, balance current, and continuous discharge rating depend on the selected BMS model.
Charging Requirements
Use a charger specifically designed for a 23S LiFePO₄ battery pack, with its charging voltage set to the cell manufacturer’s approved limit.
Nominal voltage: 73.6V
Typical maximum charge voltage at 3.6V per cell: 82.8V
Charger current: Select according to cell specifications and the BMS charging-current limit.
Do not use a 72V-class NMC charger without confirming voltage compatibility. The charger, inverter, motor controller, and connected equipment must support the actual voltage range of this 23S LFP pack.
Applications
Industrial energy storage systems
Solar energy storage and backup power
Compatible electric vehicles and utility vehicles
High-capacity DC power systems
Industrial machinery and equipment
Custom energy storage projects
Backup power systems designed for 23S LFP voltage
Package Includes
1 × Power Pack LiFePO₄ 23S 315Ah Battery Pack
1 × Integrated BMS
Battery terminals and cables, as specified in the final configuration
