Description
Power Pack LiFePO₄ 23S 72V 150Ah 23S10P 3C With BMS LFP Battery Pack
The Power Pack LiFePO₄ 23S 72V 150Ah 3C Battery Pack with BMS is designed for compatible electric mobility, industrial equipment, and customized high-voltage power applications. Built using Lithium Iron Phosphate (LiFePO₄ or LFP) chemistry, this rechargeable battery pack provides high energy capacity and stable performance when operated according to the cell manufacturer’s specifications.
The 23S10P configuration contains 23 series groups with 10 cells connected in parallel per group, for a total of 230 cells. Assuming 15Ah cells, the pack provides a capacity of 150Ah and approximately 11,040Wh (11.04kWh) of nominal energy.
The included Battery Management System (BMS) helps monitor and protect the battery. Actual discharge performance depends on the selected cells, BMS rating, wiring, connectors, and thermal conditions.
Key Features
Battery Chemistry: Lithium Iron Phosphate (LiFePO₄ / LFP)
Voltage Class: Marketed as 72V class
Nominal Voltage: 73.6V
Capacity: 150Ah (150000mAh)
Configuration: 23S10P
Total Cells: 230, assuming the specified configuration
Energy Capacity: Approximately 11.04kWh
Specified Discharge Rate: 3C
Theoretical 3C Discharge Current: 450A
BMS: Included; current rating to be confirmed
Customization: Connector, wiring, enclosure, and BMS options subject to requirements
Battery Configuration
This battery pack uses a 23S10P configuration:
23S: 23 cell groups connected in series.
10P: Ten 15Ah cells connected in parallel per group, assuming 15Ah cells.
Total cells: 23 × 10 = 230 cells.
Nominal voltage: 23 × 3.2V = 73.6V.
Capacity: 10 × 15Ah = 150Ah.
Nominal energy: 73.6V × 150Ah = 11,040Wh.
3C Discharge Configuration
At the specified 3C discharge rate:
\[ 150Ah \times 3C = 450A \]The theoretical discharge current is 450A. Actual continuous discharge capability must be confirmed against the cell manufacturer’s discharge rating, BMS current limit, wiring, connectors, and thermal conditions. Do not operate the pack at 450A unless every component is appropriately rated for that current.
BMS Protection
The battery pack includes a Battery Management System (BMS). Depending on the selected model, available protection functions may include:
Overcharge protection
Over-discharge protection
Overcurrent protection
Short-circuit protection
Cell-voltage monitoring and balancing
Temperature protection, if supported
Important: Confirm the BMS current rating and protection features before operating the battery under high loads.
Connector & Wire
High-current output connector selected according to the application.
Cable gauge matched to the expected current and cable length.
Charging connection configured to suit the charger and BMS.
Custom connector and wiring options available upon confirmation.
Applications
This 23S LiFePO₄ battery pack may be suitable for:
Compatible electric mobility projects
Industrial and portable power equipment
Robotics and automation systems
Specialized DC power systems
Custom OEM battery applications
Verify equipment voltage limits, current requirements, connector compatibility, and charging specifications before installation.
Advantages
LiFePO₄ chemistry for stable operation when used correctly
150Ah capacity with approximately 11.04kWh nominal energy
Integrated BMS for battery monitoring and protection
Configurable wiring and connector options
Suitable for compatible high-voltage DC applications
Package Includes
1 × Power Pack LiFePO₄ 23S10P 150Ah battery pack
1 × BMS, installed or supplied as configured
Output and charging cables/connectors as specified in the confirmed order
