Description
Power Pack LiFePO₄ 20S 64V 90Ah 20S6P 3C With BMS LFP Battery Pack
The Power Pack LiFePO₄ 20S 64V 90Ah 3C Battery Pack is a high-capacity rechargeable lithium iron phosphate battery designed for compatible electric mobility systems, industrial equipment, and customised power applications. With a nominal voltage of 64V and a capacity of 90Ah, it delivers approximately 5,760Wh (5.76kWh) of energy.
Built using LiFePO₄ cells in a 20S6P configuration, this battery pack includes a Battery Management System (BMS) to help protect the cells during charging and discharging. Its specified 3C discharge rating corresponds to a theoretical discharge current of up to 270A, provided the cells, BMS, cables, and connectors are rated for the required load.
This battery is suitable for applications requiring substantial energy capacity, high discharge capability, and integrated battery protection.
Key Features
Battery Chemistry: LiFePO₄ (Lithium Iron Phosphate)
Nominal Voltage: 64V
Battery Capacity: 90Ah
Energy Capacity: 5.76kWh
Configuration: 20S6P
Cell Type: LiFePO₄ cells
Cell Capacity: 15Ah, assuming matched cells
Discharge Rating: 3C
Theoretical 3C Discharge Current: 270A
BMS: Included
Battery Type: Rechargeable
Applications: Compatible electric mobility, industrial equipment, and custom power systems
Battery Configuration
Series Configuration: 20 cell groups connected in series (20S).
Parallel Configuration: 6 cells per group (6P).
Total Cell Count: 20 × 6 = 120 cells.
Nominal Voltage: 20 × 3.2V = 64V.
Battery Capacity: 15Ah × 6 = 90Ah, assuming 15Ah cells.
Total Energy: 64V × 90Ah = 5,760Wh (5.76kWh).
Maximum Charge Voltage: 72V, assuming 3.6V per cell.
3C Discharge Configuration
At a 3C discharge rate, the theoretical discharge current is:
90Ah × 3C = 270A
Actual continuous discharge capability depends on the cells, BMS current rating, wiring, connectors, cooling, and operating conditions. Ensure every component is rated for the intended load before operating the battery at 270A.
BMS Protection
The included Battery Management System helps monitor and protect the battery pack. Depending on the selected BMS model, protection functions may include:
Cell overvoltage protection
Cell undervoltage protection
Overcurrent protection
Short-circuit protection
Temperature monitoring and protection, if supported
Cell balancing, if supported
Use a 20S LiFePO₄-compatible BMS with appropriate charging and discharging current ratings.
Connector & Wire
High-current connector or terminals selected for the application
Cable size selected according to current, cable length, and installation conditions
Custom wire lengths available on request
Properly insulated connections for reliable installation
Applications
Compatible electric mobility systems
Custom electric vehicle projects
Industrial and electronic equipment
Special-purpose power systems
Custom lithium battery applications
Equipment designed for a 64V nominal LFP battery
Advantages
High capacity of 90Ah with 5.76kWh nominal energy
LiFePO₄ chemistry for stable operation and long service life when used correctly
Integrated BMS for battery monitoring and protection
20S6P configuration for increased energy storage
Specified 3C discharge capability, subject to component ratings
Customisable connectors and wiring
Package Includes
1 × Power Pack LiFePO₄ 20S 64V 90Ah battery pack
1 × 20S LiFePO₄-compatible BMS
Battery leads and connectors according to the selected configuration
