Description
Power Pack LiFePO₄ 19S 60V 12000mAh 19S2P 3C Discharge LFP Battery Pack
The Power Pack LiFePO₄ 19S 60V 12000mAh 19S2P 3C Discharge LFP Battery Pack is a rechargeable lithium iron phosphate battery designed for 60V-class electric vehicles, e-bikes, robotics, industrial equipment, and custom power applications.
This battery uses a 19S2P configuration, consisting of 38 LiFePO₄ cells. With 6000mAh cells connected in a 2P arrangement, the pack provides 12Ah capacity, 60.8V nominal voltage, and approximately 729.6Wh of nominal energy.
The 3C discharge specification provides a theoretical discharge current of up to 36A, subject to the actual cell, BMS, wiring, connector, and thermal design.
Key Features
- LiFePO₄ / LFP rechargeable battery chemistry
- 19S2P configuration
- 60V-class battery pack
- 12000mAh / 12Ah capacity
- 60.8V nominal voltage
- 68.4V maximum charging voltage
- Approx. 729.6Wh energy capacity
- 3C discharge specification
- Theoretical 3C current up to 36A
- High thermal stability
- Long cycle life
- Suitable for EV and industrial applications
- Custom BMS, connector and wire options available
19S2P Battery Configuration
The 19S2P configuration consists of:
- 19 cells/groups connected in series
- 2 cells connected in parallel in each group
- Total cells: 19 × 2 = 38 cells
- Individual cell capacity: 6Ah
- Pack capacity: 6Ah × 2P = 12Ah
Voltage Calculation
19 × 3.2V = 60.8V nominal
19 × 3.6V = 68.4V maximum charge voltage
Energy Calculation
60.8V × 12Ah = 729.6Wh
3C Discharge Configuration
For a 12Ah battery:
12Ah × 3C = 36A
Therefore, the theoretical 3C discharge current is 36A.
Actual continuous discharge capability depends on:
- Cell discharge rating
- BMS current rating
- Busbar/nickel-strip design
- Cable gauge
- Connector rating
- Battery temperature
- Thermal management
BMS Protection
A suitable 19S LiFePO₄ BMS can provide:
- Overcharge protection
- Over-discharge protection
- Over-current protection
- Short-circuit protection
- Cell voltage monitoring
- Cell balancing
- Temperature protection
- Low-temperature charging protection where supported
The BMS should be selected according to the required continuous and peak load.
Connector & Wire
- 5mm DC Jack / 2-Pin JST options available
- Approx. 5cm standard wire length
- Customized wire length available
- Connector can be customized according to application
- Higher-current connector options available where required
Applications
Suitable for:
- Electric scooters
- Electric bikes
- EV systems
- Robotics
- Industrial equipment
- Portable power systems
- DC power applications
- Backup power systems
- Small energy-storage systems
- Custom OEM battery packs
- Prototype and engineering projects
Advantages
- 12Ah high-capacity configuration
- 60V-class battery system
- Approx. 729.6Wh energy
- LiFePO₄ chemistry
- High thermal stability
- Long service life
- Rechargeable design
- 3C discharge capability
- Custom BMS and connector options
- Suitable for OEM applications
Package Includes
- 1 × 19S2P LiFePO₄ Battery Pack
- 19S LiFePO₄ BMS
- Output wires/connectors as selected
- Battery insulation and protection materials
