Description
Power Pack LiFePO₄ 15S 48V 300Ah Prismatic LFP Battery Pack
The Power Pack LiFePO₄ 15S 48V 300Ah Prismatic LFP Battery Pack is a high-capacity rechargeable battery designed for solar energy storage, backup power, industrial equipment, and compatible 48V-class energy systems. Using lithium iron phosphate (LiFePO₄) chemistry, this battery provides a nominal voltage of 48V and a capacity of 300Ah, delivering approximately 14.4kWh of nominal energy.
The battery uses 15 prismatic LiFePO₄ cells rated at 300Ah each, connected in series in a 15S1P configuration. A compatible 15S LiFePO₄ Battery Management System (BMS) can be selected according to the system’s charging and discharge requirements.
Key Features
Battery Chemistry: LiFePO₄ (Lithium Iron Phosphate)
Nominal Voltage: 48.0V
Battery Capacity: 300Ah / 300,000mAh
Nominal Energy: 14,400Wh (14.4kWh)
Configuration: 15S1P
Cell Type: Prismatic LFP cells
Rechargeable design for energy storage applications
BMS configuration options based on application requirements
Suitable for compatible solar, inverter, and industrial systems
Custom cables, connectors, and enclosure options
Battery Configuration
15S1P: 15 prismatic cells connected in series.
Nominal voltage: 15 × 3.2V = 48.0V.
Capacity: 300Ah.
Nominal energy: 48.0V × 300Ah = 14,400Wh (14.4kWh).
BMS Protection
A compatible 15S LiFePO₄ BMS is recommended to monitor the individual cell voltages and provide protection against overcharging, over-discharging, overcurrent, and short circuits, depending on the selected model.
The BMS must be rated for the intended continuous and peak current. High-capacity batteries also require appropriately sized cables, busbars, fuses, and connectors.
Applications
Solar energy storage systems
Home and commercial backup power
Compatible 48V-class inverters
Industrial energy storage systems
Telecom and DC backup applications
Renewable energy installations
Custom high-capacity battery projects
Package Includes
15S 48V 300Ah prismatic LiFePO₄ battery pack
BMS, if included in the selected configuration
Power cables and connectors as specified in the order
Enclosure, if specified
Important Charging Information
Use a charger or inverter-charger specifically configured for a 15S LiFePO₄ battery. The typical maximum charging voltage is 54.0V, subject to the cell manufacturer’s specifications.
Before installation, confirm the inverter’s compatible battery voltage range, charging profile, BMS communication requirements, and current limits. Not every device marketed as a “48V battery system” is compatible with a 15S LFP pack.
