Description
Power Pack LiFePO₄ 1S 3V 60000mAh 1S4P 3C with BMS LFP Battery Packp
The Power Pack LiFePO₄ 1S 3V 60000mAh 1S4P 3C with BMS is a rechargeable Lithium Iron Phosphate (LFP) battery pack designed for compatible low-voltage electronic equipment, industrial devices, and custom power applications. It features a 1S4P configuration, with four 15000mAh cells connected in parallel to provide a total capacity of 60000mAh (60Ah).
With a nominal voltage of 3.2V and approximately 192Wh of energy, this battery pack offers high capacity in a single-series configuration. The included Battery Management System (BMS) helps manage battery operation and provides protection according to the selected BMS model.
Lion Battery provides lithium battery solutions for custom applications, with connector, cable, and packaging options subject to confirmation.
Key Features
Battery Chemistry: LiFePO₄ (Lithium Iron Phosphate)
Nominal Voltage: 3.2V
Capacity: 60000mAh (60Ah)
Configuration: 1S4P
Cell Arrangement: 4 cells connected in parallel, assuming 15000mAh cells
Energy Capacity: Approximately 192Wh
Specified Discharge Rate: 3C
Theoretical 3C Discharge Current: 180A
BMS: Included; current rating to be confirmed
Rechargeable Design: Suitable for compatible low-voltage equipment
Customization: Connector and cable options subject to requirements
Battery Configuration
The 1S4P configuration means four cells are connected in parallel. This increases the total capacity while maintaining the nominal voltage of a single LiFePO₄ cell.
Configuration Detail Value Series Connection 1S Parallel Connection 4P Total Cell Count 4 Capacity per Cell 15000mAh (assumed) Total Pack Capacity 60000mAh / 60Ah Nominal Voltage 3.2V Typical Maximum Charging Voltage 3.6V Total Energy 192Wh 3C Discharge Configuration
The theoretical discharge current at 3C is calculated as follows:
60Ah × 3C = 180A
Parameter Value Battery Capacity 60Ah Specified Discharge Rate 3C Theoretical Discharge Current 180A Nominal Voltage 3.2V Theoretical Power at 3.2V and 180A 576W Important: The calculated 180A is not a guarantee of continuous output. Actual safe discharge current depends on the cells’ discharge ratings, BMS current limit, wiring, connectors, and thermal conditions. Confirm that all components can safely support the required current before use.
BMS Protection
This battery pack includes a Battery Management System (BMS). Depending on the selected model, protection functions may include:
Overcharge protection
Over-discharge protection
Overcurrent protection
Short-circuit protection
Battery voltage monitoring
Note: Confirm the BMS current rating and exact protection features before connecting high-current equipment.
Charging Requirements
Use a charger designed specifically for LiFePO₄ battery chemistry.
The typical maximum charging voltage for this 1S pack is 3.6V.
Do not use a standard 4.2V single-cell lithium-ion/NMC charger.
Confirm the recommended charging current with the supplier.
Check connector polarity before connecting the charger or load.
Applications
This 3.2V 60Ah LiFePO₄ battery pack may be suitable for compatible applications such as:
Low-voltage electronic equipment
Industrial monitoring systems
Embedded electronic devices
Custom portable power projects
Backup power for compatible equipment
Battery-powered prototypes and DIY projects
Specialized equipment requiring a single-series LiFePO₄ battery
Compatibility note: Verify the equipment’s operating voltage and peak current requirements before selecting this battery pack.
Advantages
Rechargeable LiFePO₄ battery chemistry
High 60Ah capacity in a 1S configuration
Approximately 192Wh nominal energy
BMS included
Suitable for compatible 3.2V nominal applications
Custom connector and cable options can be discussed
Designed for specialized low-voltage power applications
Package Includes
1 × Power Pack LiFePO₄ 1S4P 60000mAh battery pack
1 × BMS
Output wires and connector according to the confirmed configuration
