Description
Power Pack LiFePO₄ 1S 3V 36000mAh 1S6P 3C with BMS LFP Battery Pack
The Power Pack LiFePO₄ 1S 3V 36000mAh 1S6P 3C with BMS is a rechargeable lithium iron phosphate (LFP) battery pack designed for compatible low-voltage equipment and custom power applications. It features a 1S6P configuration, with six 6000mAh cells connected in parallel to provide a total capacity of 36000mAh (36Ah).
With a nominal voltage of 3.2V and approximately 115.2Wh of energy, this battery pack provides high capacity in a single-series configuration. The included Battery Management System (BMS) helps manage battery operation and provides protection according to the selected BMS model.
Lion Battery offers lithium battery packs for various electronic, industrial, and custom applications. Connector type, cable length, dimensions, and BMS specifications should be confirmed according to your requirements.
Key Features
- Battery Chemistry: Lithium Iron Phosphate (LiFePO₄ / LFP)
- Nominal Voltage: 3.2V
- Capacity: 36000mAh (36Ah)
- Configuration: 1S6P
- Cell Arrangement: 6 cells connected in parallel, assuming 6000mAh cells
- Energy Capacity: Approximately 115.2Wh
- Specified Discharge Rate: 3C
- Theoretical 3C Discharge Current: 108A
- BMS: Included
- Rechargeable: Yes
- Applications: Compatible low-voltage electronics and custom battery-powered equipment
- Customization: Connector and cable options subject to confirmation
Battery Configuration
The 1S6P configuration means six individual cells are connected in parallel. The parallel arrangement increases capacity while maintaining the voltage of a single LiFePO₄ cell.
| Configuration Detail | Value |
|---|---|
| Series Connection | 1S |
| Parallel Connection | 6P |
| Total Cell Count | 6 |
| Capacity per Cell | 6000mAh (assumed) |
| Total Pack Capacity | 36000mAh / 36Ah |
| Nominal Voltage | 3.2V |
| Typical Maximum Charging Voltage | 3.6V |
| Total Energy | 115.2Wh |
3C Discharge Configuration
The theoretical discharge current at 3C is calculated as follows:
36Ah × 3C = 108A
| Parameter | Value |
|---|---|
| Battery Capacity | 36Ah |
| Specified Discharge Rate | 3C |
| Theoretical Discharge Current | 108A |
| Nominal Voltage | 3.2V |
| Theoretical Power at 3.2V and 108A | 345.6W |
Important: The calculated 108A is not a guarantee of continuous output. Actual safe discharge current depends on the cells’ discharge ratings, BMS current limit, wiring, connectors, and thermal conditions. Verify that all components can safely support the intended load.
BMS Protection
This battery pack includes a Battery Management System (BMS). Depending on the selected BMS model, protection features may include:
- Overcharge protection
- Over-discharge protection
- Overcurrent protection
- Short-circuit protection
- Battery voltage monitoring
Note: The BMS current rating and exact protection features must be confirmed before use, especially for high-current applications.
Charging Requirements
- Use a charger designed specifically for LiFePO₄ chemistry.
- The typical maximum charging voltage for this 1S pack is 3.6V.
- Do not use a standard 4.2V single-cell lithium-ion/NMC charger.
- Confirm the recommended charging current with the supplier.
- Check connector polarity before connecting the charger or load.
Applications
This 3.2V 36Ah LiFePO₄ battery pack may be suitable for compatible applications such as:
- Low-voltage electronic equipment
- Custom portable power projects
- Monitoring and embedded systems
- Industrial electronic equipment
- Backup power for compatible devices
- Battery-powered prototypes and DIY projects
- Specialized equipment requiring a single-series LiFePO₄ battery
Compatibility note: Confirm the equipment’s operating voltage and peak current requirements before selecting this battery pack.
Advantages
- Rechargeable LiFePO₄ battery chemistry
- High 36Ah capacity in a 1S configuration
- Approximately 115.2Wh nominal energy
- BMS included
- Suitable for compatible 3.2V nominal applications
- Custom connector and cable options can be discussed
- Appropriate for specialized low-voltage battery projects
Package Includes
- 1 × Power Pack LiFePO₄ 1S6P 36000mAh battery pack
- 1 × BMS
- Output wires and connector according to the confirmed configuration
