Description
Power Pack LiFePO₄ 1S 3V 30000mAh 1S5P 3C with BMS LFP Battery Pack
The Power Pack LiFePO₄ 1S 3V 30000mAh 1S5P 3C with BMS is a rechargeable lithium iron phosphate (LFP) battery pack designed for applications requiring a low-voltage power source with high capacity. It features a 1S5P configuration, consisting of five 6000mAh cells connected in parallel, providing a total capacity of 30000mAh (30Ah).
With a nominal voltage of 3.2V and an energy capacity of approximately 96Wh, this battery pack is suitable for compatible electronic equipment, portable power systems, and custom battery-powered projects. The included BMS helps manage battery operation and provides protection according to the selected BMS model.
Lion Battery offers lithium battery packs for custom applications, with configuration options available according to your project requirements.
Key Features
- Battery Chemistry: LiFePO₄ (LFP)
- Nominal Voltage: 3.2V
- Capacity: 30000mAh (30Ah)
- Configuration: 1S5P
- Cell Arrangement: Five cells connected in parallel, assuming 6000mAh cells
- Energy Capacity: Approximately 96Wh
- Discharge Rating: 3C specified; actual current depends on cell and BMS ratings
- BMS Included: Yes
- Rechargeable Design: Suitable for compatible low-voltage equipment
- Custom Options: Connector, cable length, and packaging can be confirmed for your application
Battery Configuration
The battery uses a 1S5P configuration, meaning five cells are connected in parallel.
| Configuration Detail | Value |
|---|---|
| Series Connection | 1S |
| Parallel Connection | 5P |
| Total Cell Count | 5 |
| Capacity per Cell | 6000mAh (assumed) |
| Total Pack Capacity | 30000mAh / 30Ah |
| Nominal Voltage | 3.2V |
| Maximum Charging Voltage | Typically 3.6V |
| Total Energy | 96Wh |
3C Discharge Configuration
At a rated capacity of 30Ah, the theoretical current at 3C is:
30Ah × 3C = 90A
| Parameter | Value |
|---|---|
| Battery Capacity | 30Ah |
| Specified Discharge Rate | 3C |
| Theoretical Discharge Current | 90A |
| Nominal Voltage | 3.2V |
| Theoretical Power at 3.2V and 90A | 288W |
Important: The 90A figure is a theoretical calculation, not a guarantee of continuous output. The actual safe discharge current depends on the cells’ discharge ratings, BMS current limit, wiring, connectors, and thermal conditions. Confirm that all components support the required current before use.
BMS Protection
This battery pack includes a Battery Management System (BMS). Depending on the selected model, its protection functions may include:
- Overcharge protection
- Over-discharge protection
- Overcurrent protection
- Short-circuit protection
- Cell voltage monitoring
The BMS current rating and supported protection features must be confirmed before connecting high-current equipment.
Charging Requirements
- Use a charger specifically designed for LiFePO₄ batteries.
- Typical maximum charging voltage for this 1S pack is 3.6V.
- Do not use a 4.2V single-cell lithium-ion/NMC charger.
- Confirm the recommended charging current with the battery supplier.
- Check connector polarity before connecting the charger or load.
Applications
This 3.2V 30Ah LiFePO₄ battery pack may be suitable for compatible applications such as:
- Low-voltage electronic equipment
- Portable power projects
- Embedded and monitoring systems
- Custom industrial electronics
- Backup power for compatible devices
- Battery-powered prototypes and DIY projects
- Specialized equipment requiring a 1S LiFePO₄ battery
Note: Confirm the equipment’s operating voltage and peak current requirements before selecting this battery.
Advantages
- Rechargeable LiFePO₄ chemistry
- 30Ah capacity in a single-series configuration
- Approximately 96Wh nominal energy
- BMS included
- Suitable for compatible 3.2V nominal applications
- Custom connector and packaging options can be discussed
Package Includes
- 1 × Power Pack LiFePO₄ 1S5P 30000mAh battery pack
- 1 × BMS (included with the pack)
- Output wires and connector, according to the confirmed configuration
