Description
BMS Replacement Service is designed to replace a damaged, faulty, or unsuitable Battery Management System SELECT (BMS) in lithium-ion and LiFePO4 battery packs.
A properly selected BMS helps protect the battery from overcharging, over-discharging, over-current, short circuits, temperature-related conditions, and cell imbalance. Our service focuses on selecting a compatible BMS and correctly connecting it to the existing battery pack.
Services
- Lithium-Ion / NMC
- LiFePO4
- 3S, 4S, 6S, 7S, 10S, 13S, 14S, 15S and other configurations
- Normal
- Smart BMS
- Bluetooth
- Common-port BMS
- Separate charge/discharge-port BMS
- High-current
- Temperature-sensor / NTC BMS replacement
- BMS wiring and balance-wire replacement
- BMS fault checking and testing
Why Replace the BMS?
A BMS may need replacement when:
- Battery does not charge
- Battery output is completely off
- BMS is damaged
- BMS frequently cuts off the battery
- Cell balancing is not working correctly
- Over-current protection activates incorrectly
- Temperature protection is faulty
- Bluetooth/smart BMS communication stops working
- Existing BMS is incorrectly rated for the application
Important
simply a plug-and-play component replacement. The replacement BMS must match the battery chemistry, number of series cells, current requirement and wiring configuration.
Incorrect BMS wiring can permanently damage the BMS or create a serious battery safety hazard. BMS installation and testing should therefore be performed by a qualified battery technician.
BMS selection, battery inspection and wiring, contact LionBattery with details of your battery pack.
